Description
The Astro-Physics Right-Angle Polar Alignment Scopes can be used with the Mach1GTO and all 900 and 1200 mounts (except the original black version) when used with the appropriate mount adapter. Each mount type has its proprietary adapter. Additionally, if you have more than one of the same mounts, each will require its own adapter. It is important to note that the adapters will add some dimension to the back of your mount which, if you have a carrying case, will require a small modification to the foam liner.
These adapters are push/pull adjustable for precise alignment. Once adjusted, they will retain their precision, allowing the polar alignment scope to be inserted and removed as needed (the adapter, itself, remains attached to the mount). This will also allow the polar scope to be used interchangeably with each of your mounts without further adjustment. The adapter’s alignment is what allows this precision polar alignment scope to provide consistent accuracy when re-installed repeatedly with either a single mount or when used with many different mounts.
In order to obtain extreme precision, it will be necessary to perform a precise polar alignment using a traditional drift alignment (visually or with CCD camera), or by using Ray Gralak’s PEMPro / Polar Align Wizard the first time that the RAPAS is used. Once the alignment is spot-on, the push/pull adjustment screws on the adapter are used to orient Polaris into its specific location on the reticle. For additional information see the .
Specifications
Adapter for Mach2GTO (RAPM2)
The mount incorporates integrated absolute encoders and fixed internal communication and power cables. As a consequence, an internal polar alignment scope option could not be used. We have designed an external RAPAS mounting system that is both high-precision and repeatable when attaching our innovative and very popular Right-Angle Polar Alignment Scope ().
The bracket is a two-part adapter. A unique dovetail mounting piece is affixed to the RA wheel housing. This piece is attached via two screws and should remain with the mount. The second part of the adapter is a removable bracket. It precisely slides into place and is secured with a thumbscrew. This allows it to be removed when not in use.
The removable bracket also utilizes the same push-pull adjustment feature that is found on the back of our other mounts. Though most users will find it unnecessary, the push-pull system will allow the back plate to which the RAPAS is attached to be adjusted in order to refine polar alignment to an even higher degree. The RAPAS can then be transferred between Astro-Physics mounts while retaining the high precision of polar alignment.
This two-part RAPAS bracket (RAPM2) is sold separately from the Right-Angle Polar Alignment Scope ().
Adapter for Mach1GTO (RAPM1)
Includes the cap (# M16106-A).
The cap (also sold separately as M16106-A) is very convenient when transporting the mount, or if you wish to remove the polar scope after initial use. It provides protection and prevents dust or little critters from entering your mount's interior. It is included with the polar scope adapters.
Note: This adapter is not needed for the Mach1GTO mounts shipped beginning in 2014 (serial number M10670 or later).
Adapter for 900 mounts (RAP900)
Includes the cap (# M16106-A).
Special note regarding a select few 900 mounts:
Please click here to see if your 900 mount can be fitted with the RAP900 Adapter.
At the time of 900GTO mount production, the orientation of the RA axis rear plate’s three attachment screws was not mechanically relevant. Consequently, there were some mounts produced that did not have their screw placement as shown in the linked photo. These mounts cannot use the RAP900 / RAPAS as sold. In some cases it may be possible to contact a machine shop and custom modify the RAP900 to remedy the problem. You will need to contact our technical support department for specific information.
The cap (also sold separately as M16106-A) is very convenient when transporting the mount, or if you wish to remove the polar scope after initial use. It provides protection and prevents dust or little critters from entering your mount's interior. It is included with the polar scope adapters.
Adapter for 1200 mounts (RAP1200)
Includes the cap (# M16106-A).
The cap (also sold separately as M16106-A) is very convenient when transporting the mount, or if you wish to remove the polar scope after initial use. It provides protection and prevents dust or little critters from entering your mount's interior. It is included with the polar scope adapters.
For all orders exceeding a value of 100USD shipping is offered for free.
Returns will be accepted for up to 10 days of Customer’s receipt or tracking number on unworn items. You, as a Customer, are obliged to inform us via email before you return the item.
Otherwise, standard shipping charges apply. Check out our delivery Terms & Conditions for more details.
